Energy & 100K Power Spike in Sandustry

Build enough generation and connected storage, then actually charge the network to a 100,000 Energy peak.

To reach 100K

1: → Generate Energy
2: → Connect enough storage
3: → Charge the network
4: → Reach a 100,000 peak

100,000 storage capacity alone is not the same as reaching a 100,000 Power Spike.

Jump to section

Plan your 100K setup

Enter the highest Energy you have actually reached and how much connected storage you have. The first result is the bottleneck, not a Copper shopping list.

Highest Energy you've actually reached

Check the highest charged Energy value you've seen. This is peak Energy, not storage capacity.

Current total storage capacity

How much Energy can your connected storage hold?

Do you already have automated Steam?

Enter both numbers to see the bottleneck.

Your bottleneck

Enter both numbers to see the bottleneck.

How the Sandustry Energy system works

An Energy network has five layers: generate, transfer, store, charge actual Energy, then hold a peak. The 100K Power Spike reads peak Energy, not capacity.

Generation

Steam

Steam Turbine

Transfer

Energy Connector

Storage

Power Brick

Actual Energy

Peak Energy

100,000 Peak Energy

A Steam Turbine does not charge Florinol / Gold Batteries. Those stores are excluded from the normal Copper / Power Brick network, and a Connector does not bridge them.

Not enough storage

If current Energy is pressed against capacity, the next Power Bricks raise the ceiling.

Not enough generation

Capacity can sit far above the Energy you have actually charged. That is a charging problem.

Ready

Connected storage can hold the peak, and charged Energy has crossed 100,000.

Choose and scale Energy storage

Copper-based Power Bricks scale storage capacity; they do not generate Energy by themselves.

Which Energy storage should I use?

Gold Battery

often called a Florinol Battery

Best for: Early / compact power
Strength: Quick to establish
Tradeoff: Relies on Florinol and sits outside the normal Energy network

Power Brick

often called a Copper Battery

Best for: Scaling capacity
Strength: Predictable 1,000 Energy per brick
Tradeoff: Needs Copper infrastructure

Role	Energy density	Reusable	Automated charging	Best for 100K
Gold Battery	16 / tile	Yes — re-ignite after it hardens	Not the Steam charging path	Poor scaling
Power Brick	1,000 / Power Brick	Rechargeable	Steam Turbine compatible	Recommended route

Why did my Florinol solidify?

This is expected after Energy is used.

Re-ignite the hardened Florinol. A heat tool such as the Rocket Launcher is the documented way to do that.

How to build scalable Copper Energy storage

Copper → Liquid Copper → Power Brick adds storage capacity. That chain does not generate Energy.

Power Brick capacity

Adds 1,000 Energy capacity·Does not generate Energy

This closes the storage gap. It does not generate or charge the Energy by itself.

Power Bricks	Added capacity	Copper	Liquid Copper
1	1,000	16	16
10	10,000	160	160
25	25,000	400	400
50	50,000	800	800
100	100,000	1,600	1,600

Generate Energy

Steam carries a charge. A Steam Turbine harvests that charge into Copper / Power Brick storage, directly or through an Energy Connector. It does not charge a Florinol / Gold Battery.

Water

Steam

Steam Turbine

Energy Connector

Power Brick

Steam Turbine not helping?

1. Steam reaches the Turbine
2. Turbine is generating
3. Energy can reach storage
4. Storage still has room

Check renewable Steam supply →

Connect your Energy network

An Energy Connector joins power structures on a network. An Energy Siphon is a tool that moves stored Energy between stores by hand.

Energy Connector

Use when you want to join or extend an Energy network.

Steam Turbine

Energy Connector

Power Brick

Network A — Connector — Network B

Energy Siphon

Use when you need directed transfer between power stores.

Gold Battery

Energy Siphon

Power Brick

Source — Siphon → Target

A Steam Turbine does not charge Florinol / Gold Batteries. Those stores are excluded from the normal Copper / Power Brick network, and a Connector does not bridge them.

Do batteries need to be in the same room?

Same room required?

Official data does not require the same room. What matters is that storage belongs to the active Energy network and that network can actually charge.

Correct Energy connection
Storage belongs to the active network
The network can actually charge

Steam Turbine

Power Brick

Energy Connector

Power Brick

Gold Battery

A Steam Turbine does not charge Florinol / Gold Batteries. Those stores are excluded from the normal Copper / Power Brick network, and a Connector does not bridge them.

Why won't Energy reach 100,000?

Pick the problem that matches what you see. Every result uses the same shape: likely area, check, next step.

Energy isn't increasing

Likely area

Generation is missing, the transfer path is broken, or storage is already full.

Check

Is Energy being generated?
Can that Energy reach connected storage?
Does storage still have free capacity?

Fix generation, the transfer path, or free storage capacity before adding more Power Bricks.

What is Energy used for?

Energy powers selected tools and machines, and the 100,000 Peak Energy milestone is a major progression gate.

Tools

Drill · Laser

Powered production

Snowmaker · Synthesizer

Progression

100,000 Peak Energy

Using Energy while trying to build a peak

If active production is drawing from the same Energy system, the peak may grow more slowly than the generation setup suggests.

Optional boost

Voltblub

Voltblub can add small amounts of Energy on filled Power Brick storage. Useful as extra generation. Not required for 100K planning.

What comes after the 100K Power Spike?

After 100,000 Peak Energy, continue into the Stratacore progression stage.

Continue to Stratacore →

Common Energy questions

How do I reach 100,000 Peak Energy in Sandustry?+

Build connected Power Brick storage and keep charging that network until peak Energy — not capacity — crosses 100,000. A Gold Battery starts the Energy tier, but Power Bricks plus sustained Steam generation are the scalable route.

Do batteries need to be in the same room?+

No. Official data does not require the same room. Storage has to belong to the active Energy network, and that network has to actually charge.

Why won't an Energy Connector transfer Gold Battery power into Power Bricks?+

Gold Battery storage is excluded from the normal Energy network. A Connector joins power structures; it does not dump Gold Battery stores onto Power Bricks. Use an Energy Siphon to move stored Energy by hand, and use Steam Turbine → Connector → Power Brick for automation.

What is the difference between a Gold Battery and a Power Brick?+

A Gold Battery (often called a Florinol Battery) is starter storage at 16 Energy per Florinol tile. A Power Brick (often called a Copper Battery) is scalable Copper storage at 1,000 Energy each and can be recharged from a generator.

Why did the Florinol in my Gold Battery solidify?+

That is the expected Gold Battery lifecycle after Energy is used. Re-ignite the hardened Florinol to make it available as an Energy source again.

What do I do after reaching 100K Energy?+

Continue into the Stratacore progression stage. The Energy page stops at that gate so the Stratacore guide can take the next step.

100K quick answer

Generation + Storage + Charge → 100K Peak

Need help?

Jump to section